Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 16)

Cardio Theater Integrated Bracket Assembly Instructions
page 16
10. Attach the power extension cable to the power
connector on the coaxial/power cable.
Locate the coaxial/power cable provided with
the LCD Screen. One end of the coaxial/power
cable has three connectors; the other end has
two connectors. Attach the power extension
cable to the power connector on the end with
the two connectors (coaxial and power).
11. Feed the coaxial/power cable with its connec-
tors through the display console bracket.
Insert the coaxial/power cable with its two
connectors up through the hole in the display
console bracket.
12. Feed the coaxial/power cable with its connec-
tors through the upright support.
Note: Leave about 3 feet (1 meter) of the
coaxial/power cable with its three connectors
(coaxial, power, and DVD) hanging out of the
hole in the display console bracket. This portion
of the cable will be fed through the bracket
assembly before it is attached to the back of
the display console.
10
Power extension
cable
Power
connector
11
12
Preparing the EFX556i
Coaxial connector
Display
console
bracket
Coaxial/power
cable
Upper
support
Power
connector