Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 22)

Cardio Theater Integrated Bracket Assembly Instructions
page 22
5
Attach the LCD Screen
Important: The screen spacer is used only for the
Cardio Theater PVS4/5/15 LCD Screen.
1. To protect the LCD Screen for the next few
steps, place it screen side down on a clean
work surface.
Important: Use proper materials to protect the
LCD Screen while you remove the plastic cover
and metal mounting bracket from the backside
of the LCD Screen.
2. Remove the plastic cover.
Use a Phillips-head screwdriver to remove
the two screws holding the plastic cover to
the LCD Screen. Discard the plastic cover and
the screws.
3. Remove the metal mounting bracket.
Remove the four screws securing the metal
mounting bracket. Discard the mounting bracket
and the four screws.
4. Retrieve four new Phillips-head screws
from the bracket assembly package.
Note: Use the longer screws if attaching the
screen spacer with the PVS4/5/15 LCD Screen.
5. Attach the LCD Screen to the bracket assembly.
If you have the Cardio Theater PVS4/5/15 LCD
Screen, you will need to insert the screen
spacer between the screen and bracket to
ensure a proper fit.
Attach the LCD
Screen
2
Plastic
cover
3
Metal mounting
bracket
LCD
screen
LCD
screen
Bracket
assembly 5
Note: The screen spacer rests between the
bracket assembly and the PVS4/5/15 LCD
Screen.
Screen spacer
(PVS4/5/15 LCD Screen only)