Specifications technical data about this product – Panasonic KX-FPC141 User Manual
Page 141
141
General
Information
Specifications
Technical data about this product
■
Main unit
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm (8
1
/
2
" ) in width
Max. 600 mm (23
5
/
8
" ) in length
Effective Scanning Width:
208 mm (8
3
/
16
" )
Recording Paper Size:
Letter: 216 mm
×
279 mm (8
1
/
2
"
×
11
" )
Legal: 216 mm
×
356 mm (8
1
/
2
"
×
14
" )
Effective Printing Width:
208 mm (8
3
/
16
" )
Transmission Time*:
Approx. 9 s/page (Original mode)**
Scanning Density:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch) —STANDARD mode
7.7 lines/mm (196 lines/inch) —FINE/HALF TONE mode
15.4 lines/mm (392 lines/inch) —SUPER FINE mode
Halftone Level:
64-level
Scanner Type:
Contact Image Sensor (CIS)
Printer Type:
Thermal Printing
Data Compression System: Modified Huffman (MH), Modified READ (MR)
Modem Speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment:
5 °C – 35 °C (41 °F – 95 °F), 20 % – 80 % RH (Relative Humidity)
Dimensions (H
×
W
×
D):
143 mm
×
345 mm
×
305 mm (5
5
/
8
"
Ч
12
13
/
16
"
Ч
12
" )
Mass (Weight):
Approx. 4.1 k
g
(8.8 lb.)
Power Consumption:
Standby:
Approx. 11 W
Transmission: Approx. 18 W
Reception:
Approx. 42 W (When receiving a 20% black document)
Copy:
Approx. 48 W (When copying a 20% black document)
Maximum:
Approx. 160 W (When copying a 100% black document)
Power Supply:
120 V AC, 60 Hz (This unit will not function at 50 Hz.)
Memory Capacity:
Voice memory: Approx. 18 minutes of recording time including the greeting
message***
Fax memory:
Approx. 28 pages of memory reception
Approx. 25 pages of memory transmission
(Based on the CCITT of No. 1 Test Chart in standard resolution.)
■
Handset
Operating Environment:
5 °C – 35 °C (41 °F – 95 °F), 45 % – 85 % RH (Relative Humidity)
Dimensions (H
×
W
×
D):
Approx. 39 mm
×
55 mm
×
271 mm (1
17
/
32
"
Ч
2
5
/
32
"
Ч
10
11
/
16
" )
Mass (Weight):
Approx. 200
g
(0.4 lb.)
Power Supply:
Ni-Cd battery (3.6 V, 600 mAh)
Frequency:
926 MHz–927 MHz, 902 MHz–903 MHz (30 channels)
Security Codes:
1,000,000
*
*
Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the
receiving unit.
**
The 9 second speed is based upon the CCITT No. 1 Test
Chart on the condition that memory transmission is performed.
***
Recording time may be reduced by the calling party’s
background noise.
CCITT No. 1 Test Chart
Note:
●
Any details given in these instructions are subject to change without
notice.
●
The pictures and illustrations in these instructions may vary slightly
from the actual product.