Panasonic KX-FPC141 - Manual (Page 27)

Date and time, your logo and facsimile
telephone number
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991.
Fax Correspondence
Your logo Your facsimile telephone number Date and time
FROM : Panasonic Fax FAX NO. : 1234567 Feb. 26 1999 04:02PM P1
Example:
Setting the date and time
1 Press .
Display:
2 Press , then .
3 Press .
Cursor
4 Enter the correct month/day/year by selecting
each 2 digits using the dial keypad.
Example: Aug. 10, 1999
Press .
5 Press .
6 Enter the correct hour/minute by selecting
each 2 digits using the dial keypad.
Press
to select “AM” or “PM”.
Example: 3:15PM
1. Press .
2. Press until “PM” is displayed.
TIME: 03:15PM
TIME: 03:15AM
1 5 0 3
TIME: 12:00AM
START/SET/COPY
M:08/D:10/Y:99
0 0 1 9 8 9
M:01/D:01/Y:99
START/SET/COPY
SET DATE & TIME
0 1
1.SYSTEM SET UP
MENU 7 Press .
8 Press . MENU
SETUP ITEM [ ]
START/SET/COPY
1 2 3
4 5 6
7 8 9
0
STOP
START/SET/COPY
MENU
JOG DIAL
/
Note:
● You can enter the number by rotating
in steps 4 and 6. In this case,
press to move the cursor.
● The accuracy of the clock is approximately
±60 seconds a month.
JOG DIAL
To correct a mistake
● Press or to move the cursor to the
incorrect number, then make the correction.
● If you press while programming, the
display will return to the previous one.
STOP
Setup (Main Unit)
Initial
Preparation
27