Panasonic DMC-LC40PP - Manual (Page 30)

28
Setting the Date/Time (Clock Set)
You can set the year from 2001 to 2099. The
24-hour system is used.
1 Press the [MENU] button.
2 Press 1 to make the setup menu
appear.
3 Press 3/4 to select [CLOCK SET],
and then press 1.
4 Press 3/4/2/1 to set date and time,
and then press 1.
5 Press 3/4 to select [M/D/Y], [D/M/Y]
or [Y/M/D].
6 Press the [MENU] button twice.
• The menu will disappear.
7 Check if the date/time setting is
displayed correctly, after turning the
camera [OFF] and [ON].
• If the message [PLEASE SET THE DATE/TIME]
appears, charge the battery about 2 hours and
set the date and time again.
REC SETUP
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO.RESET
CLOCK SET
SELECT SET EXIT
CLOCK SET
SELECT SET EXIT
2 MIN.
M/D/Y