Panasonic DMC-LC40PP - Manual (Page 71)

69
Protecting Images on the Card
It is possible to protect the important images
recorded on the card from accidental erasure.
[Preparation]
• Set the operational mode dial to playback [ ].
[Single setting/to cancel]
1 Press the [MENU] button.
2 Press 3/4 to select [PROTECT] and
then press 1.
3 Select [SINGLE] and then press 1.
4 Press 2/1 to select 1 image.
5 Press the [REVIEW/SET] button.
6 Press the [MENU] button twice.
• The menu will disappear.
[Multi setting/to cancel, To cancel all
settings]
1 The method is the same as in “Writing
the Print Information in the Card (DPOF
Setting)”. (P66~P68)
• Formatting the card will erase all the data on the card, even if you protect the images in this
procedure.
• When trying to delete a protected file, these messages are displayed “THIS PICTURE IS
PROTECTED” or “SOME PICTURES CAN’T BE DELETED”. If you want to delete this file,
cancel the protect setting first.
• The protect setting is effective only in this camera.
PLAY SETUP
DELETE
PROTECT
SLIDE SHOW
AUDIO DUB.
SELECT: SET: EXIT:
SINGLE
MULTI
CANCEL
DPOF
RESIZE