Using the auto review, P78) – Panasonic DMC-LC40PP User Manual
Page 80
78
Using the Auto Review
Recording with the auto review set to [ON],
the recorded picture is automatically
displayed on the LCD monitor for about 2
seconds.
[Preparation]
Set the operational mode dial to REC mode
(single mode [
] or burst mode [
]).
1
Press the [MENU] button.
2
Press
1 to open the setup menu.
3
Press
3/4 to select [AUTO REVIEW].
4
Press
2/1 to select [ON].
5
Press the [MENU] button.
• The menu will disappear.
• In burst mode [
] or auto bracket, only the first recorded picture is displayed.
• Even when setting the auto review to [ON], it is not available in motion image mode [
].
• When recording in burst mode [
], auto bracket, TIFF or still picture with audio modes,
the auto review is set to [ON].
REC
SETUP
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO. RESET
CLOCK SET
SELECT:
SET
EXIT
2 MIN.