Panasonic DMC-LC40PP - Manual (Page 42)

40
Taking Pictures with Program AE Mode
The shutter speed and aperture value are set
automatically according to the brightness of
the subject. The combination of the shutter
speed and aperture value is the same as that
of the AUTO mode (P29), but the settings
listed below are also available. (It is not
possible to set in AUTO mode)
• Slow sync./Red-eye reduction [ ] (P34)
• 2 seconds self-timer (P36)
• TIFF [ ] quality (compression ratio) (P39)
• Exposure compensation (P48)
• Auto bracket (P49)
• Picture adjustment (P51)
• White balance (P52)
• ISO sensitivity selection (P54)
• Spot mode (P55)
[Preparation]
• Set the operational mode dial. (P25)
1 Set the REC mode dial to P/A/S.
2 Press the [MENU] button.
3 Press 3/4 to select [AE MODE].
4 Press 2/1 to set to [P].
5 Press the [MENU] button.
• The menu will disappear.
6 Take a picture.
• The recording method is the same as in
“Taking Pictures (AUTO Mode)”. (P29)
• When taking pictures in dark places, as the exposure time becomes longer and it is difficult
to stabilize the camera, the use of a tripod is recommended.
• If the aperture value is not properly set, the color of the F and the shutter speed values on
the LCD monitor becomes red.
REC SETUP
W.BALANCE
SENSITIVITY
SPOT AF
AUDIO REC.
PICT.SIZE
SELECT: SET EXIT
AE MODE P A S AE