Panasonic DMC-LC40PP - Manual (Page 60)

58
Using the Conversion Lens
Using the tele conversion lens (DMW-LT52,
optional), it is possible to zoom in much more;
using the wide conversion lens (DMW-LW52,
optional), it is possible to widen much more.
(When attaching the conversion lens, the
Close-up lens (DMW-LC52, optional) or MC
protector (DMW-LMC52; optional) to the
camera, the conversion lens adaptor
(DMW-LA1) is necessary)
1 Remove the lens ring.
2 Attach the conversion lens adaptor
1.
3 Install the tele conversion lens B or
the wide conversion lens A.
• When attaching the tele conversion lens and
rotating the zoom lever towards W, a vignetting
effect occurs. Only rotate towards T.
• When using the conversion lens, set the built-in
flash to forced OFF.
• When attaching the conversion lens, use the
LCD monitor.
• To prevent the lens from being stained with water
or oil, attach both the optional conversion lens
adaptor and the optional MC protector to protect
the lens.
• For further information, read the conversion lens
operating instructions.