PSC FALCON 315 - Manual (Page 12)

Terminal Setup
When the installation is complete, reboot the system to initialize the Twin Client
software.
a. To reboot the system immediately, click on Finish .
b. To reboot later, click on the option to restart the computer later, and then click on
Finish .
Running the Manager
The PowerNet Twin Client Manager is the utility that manages the terminal software and
configurations.
Select Start , Programs , PowerNet , and Twin Client Manager . The PowerNet Twin
Client Manager screen appears as shown in the following figure. This is the
administrator's main screen, and all functions are accessed from its menu bar, toolbar, and
tabs.
Menu Bar
The menu bar provides access to the functions used to configure the terminals and
manage their software.
Supported Equipment Manual
• May, 2006 2-4