PSC FALCON 315 - Manual (Page 30)

Terminal Setup
Authorizing PowerNet
Each PowerNet Twin Client will run for 30 minutes at a time without authorization.
Uninterrupted operation for a production environment is the result of authorizing the
software.
The Twin Client Manager can automatically authorize the terminal over the wireless
network if the following requirements are met:
• A PC running Twin Client Manager is connected to the wire LAN segment with at
least one access point within range of the terminal.
• The System ID of the PC on which Twin Client Manager is installed has been used to
obtain a site license Authorization code from the Connect web site.
To obtain the Twin Client Manager’s System ID, click on Authorization under Tools .
The Authorization window is displayed as shown below.
Supported Equipment Manual
• May, 2006 2-22