Downloading files to terminal – PSC FALCON 315 User Manual
Page 19
Quick
Start
Click on the
+
sign in front of
Terminal/Group Manager
to access the default terminal
group. Next, click on the
New Group
icon and use the
Browse
button to select the
configuration file saved earlier.
Check the
Active
box, and the system is now configured to automatically download IP
addresses, software, and configuration files to the terminals. Click on the box in the
upper right corner to return to the main menu.
Note:
The software does not need to be authorized now. It can be authorized later, after a
Telnet session has been established. The procedure is described in Authorizing
PowerNet.
Downloading Files To Terminal
Twin Client program and configuration files are installed on the terminal with the
following procedure. Boot the terminal according to the instructions in the next section.
At the DOS prompt, type “
LD
” but do not
Enter
at this time.
Under the
Terminal
menu, click on the
Send Program Files to Terminal
menu option.
Supported Equipment Manual
• May, 2006
2-11