PSC FALCON 315 User Manual
Page 48
Advertising
Terminal Setup
6.
With the RF terminal sitting at the
Press Any Key
prompt, select
Actions/Start
Monitor.
7. Press a key on the RF terminal to open a session, and you should see trace data in the
RF Monitor window. When done, end the trace and the file will be named
tnxxx.yyy.log
(where
xxx.yyy
is the last 2 octets of the RF terminal’s IP address) in
the directory in which RF Monitor was running.
Supported Equipment Manual
• May, 2006
2-40
Advertising