Powerware 9135 Two-in-One UPS 5000/6000 VA - Manual (Page 2)

Requesting a Declaration of Conformity
Units that are labeled with a CE mark comply with the following harmonized standards and EU directives:
S Harmonized Standards: EN 62040−1−1 and EN 62040−2; IEC 60950−1
S EU Directives:
73/23/EEC, Council Directive on equipment designed for use within certain voltage limits
93/68/EEC, Amending Directive 73/23/EEC
2004/108/EEC, Council Directive relating to electromagnetic compatibility
The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC
Declaration of Conformity, contact:
Eaton Power Quality Oy
Koskelontie 13
FIN−02920 Espoo
Finland
Phone: +358−9−452 661
Fax: +358−9−452 665 68
Eaton, Powerware, ABM, FERRUPS, LanSafe, and X−Slot are registered trademarks and ConnectUPS is a trademark
of Eaton Corporation or its subsidiaries and affiliates. IBM, AS/400, and iSeries are registered trademarks of
International Business Machines Corp. National Electrical Code and NEC are registered trademarks of National Fire
Protection Association, Inc. Phillips is a registered trademark of Phillips Screw Company. All other trademarks are
property of their respective companies.
ECopyright 2008 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.