Powerware 9135 Two-in-One UPS 5000/6000 VA - Manual (Page 47)

INSTALLATION
EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
41
Input Cable
Output Cable
Figure 22. Installing the Input and Output Cables (EU Models)
6. Replace the terminal block cover and tighten the cables.
7. Secure the terminal block cover with the two screws removed in
Step 1.
8. Plug the equipment to be protected into the appropriate UPS output
receptacles using the supplied cables (see page 61 for more
information on load segments). See Figure 23.
Connect any high−power devices to the 16A outlet.
9. Install the cord−retention brackets to secure the cords and provide
strain relief.
Cord−Retention
Brackets
(2) 16A Receptacles
(4) Non−Priority Receptacles
(4) Priority Receptacles
Figure 23. Connecting the Power Cords (EU Models)