Chapter 8 specifications, Accessories, Audio system – Panasonic AJ-HDX900E User Manual

Page 133: Audio output connectors, Video input connector, Video output connector, Time code input connector, Time code output connector, Other connectors, Continued)

Advertising
background image

133

8

Audio System

Sampling frequency:

48 kHz (synchronized with video)

Quantizing:

16 bits

Frequency response:

20 Hz to 20 kHz ±1.0 dB (at 1 kHz, reference level)

Dynamic range:

Better than 85 dB (at 1 kHz, AWTD)

Distortion:

Less than 0.1% (at 1 kHz, reference level)

Wow and flutter:

Below measurable limits

Head room:

For AJ-HDX900P: 20 dB
For AJ-HDX900E: 18 dB

[CONNECTOR SECTION]
Audio Input Connectors

MIC IN (XLR, 5 pins, female):

For stereo
Phantom power supply:

+48 V (It is possible to turn ON/OFF from the menu.)

Input level:

–40 dBu (–50 dBu or –40 dBu, selected on menu)

AUDIO IN CH1/CH2 (XLR a2, 3 pins, female):

LINE/MIC/MIC + 48 V switching type
LINE:

For AJ-HDX900P: +4 dBu
For AJ-HDX900E: 0 dBu

(–3 dBu, 0 dBu or +4 dBu, selected on menu)

MIC: –60 dBu (–60 dBu or –50 dBu, selected on menu)
MIC + 48 V:

–60 dBu (–60 dBu or –50 dBu, selected on menu)

WIRELESS IN (D-SUB, 25 pins):

Input level: –40 dBu

Audio Output Connectors

AUDIO OUT CH1/CH2 (XLR, 5 pins, male):

Output level:

For AJ-HDX900P: +4 dBu
For AJ-HDX900E: 0 dBu

(–3 dBu, 0 dBu or +4 dBu, selected on menu)

PHONES:

Stereo mini jacks a2

Video Input Connector

GENLOCK IN (BNC):

1.0 V

P-P

, 75

(It can also be used as an input connector for the return
video signals.)

Video Output Connector

VIDEO OUT (BNC):

It can be switched among HD-SDI/SD-SDI/Composite.
HD-SDI

: 0.8 V

P-P

, 75

SD-SDI

: 0.8 V

P-P

, 75

Composite : 1.0 V

P-P

, 75

MON OUT (BNC):

It can be switched between HD-SDI and HD-Y
HD-SDI

: 0.8 V

P-P

, 75

HD-Y

: 1.0 V

P-P

, 75

Ω (analog signal)

Time Code Input Connector

TC IN (BNC):

0.5 V

P-P

to 7 V

P-P

, high impedance

Time Code Output Connector

TC OUT (BNC):

2.0 V

P-P

, low impedance

Other Connectors

LENS (12 pins)
REMOTE (10 pins, connector used for AJ-RC10G)
DC IN (XLR, 4 pins, male):

DC 11 V to 17 V

DC OUT (4 pins):

DC 11 V to 17 V, the maximum output current 1.5 A

EVF (20 pins)

This supports the viewfinder that can be switched
between 59.94 Hz and 50 Hz.

DVCPRO output connector (6 pins)
GPS (6 pins, connector used for AJ-GPS900G)

[ACCESSORIES]

Shoulder strap
FRONT AUDIO LEVEL control knob
Control knob mounting screw
a1

Chapter 8 Specifications

(continued)

Weight and dimensions when shown are approxlmately.
Speclilcailons are subject to change without notice.

Advertising