Panasonic AJ-HDX900E - Manual (Page 55)

55
4
Chapter 4 Adjustments and settings for recording
(continued)
Whether a display is
to be shown or not
can be selected on a
menu.
Status displayed
when established
Displayed only by
MODE CHECK
button (*1)
Display can be
cleared
Displayed during
playback
1 Systetm mode ≤ — µ ≤ —
2 Camera mode ≤ — µ ≤ —
3 Shutter speed/mode ≤ ≤ µ ≤ —
4 Total length of cassette tape — — µ ≤ —
5 Remaining tape ≤ — µ ≤ —
6 Unit’s REC display ≤ ≤ µ ≤ —
7 Battery type — — µ ≤ —
9 MODE CHECK dedicated display area — — ≤ ≤ —
8 Remaining battery charge/voltage ≤ — µ ≤ —
: Camera warning, message display area — ≤ ≤ ≤ —
; Information allocated to USER buttons — ≤ ≤ ≤ —
< Extender ≤ ≤ µ ≤ —
= Color temperature ≤ ≤ µ ≤ —
> Filter positions ≤ — µ ≤ —
? WHITE BAL switch position ≤ — µ ≤ —
@ Cumulative gain display ≤ — µ ≤ —
A LINE MIX GAIN display ≤ — µ ≤ —
B Gain value ≤ — µ ≤ —
C VTR warnings, information ≤ ≤ µ ≤ —
D Time code display ≤ — µ ≤
≤
(dependent upon
menu)
E AUDIO input system and level meter ≤ —
All input information
for 4 channels
≤ —
F Super black ON ≤ ≤ µ ≤ —
G Super iris ON ≤ ≤ µ ≤ —
H Iris override display ≤ ≤ µ ≤ —
I Iris, f-value ≤ — µ ≤ —
J Zoom display ≤ — µ ≤ —
K Interval, pre-rec display — ≤ µ ≤ —
L Dynamic range stretcher mode ≤ — µ ≤ —
M Compression mode ≤ ≤ ≤ ≤ —
Viewfinder screen display selection
*1 ≤ : The display does not appear when OFF has been selected for the STATUS item setting on the <MODE CHK IND> screen.
µ : Display always appears regardless of the menu.