Panasonic AJ-HDX900E - Manual (Page 86)

86
5-4 Audio input signal preparations
Prepare to connect the audio components which will supply
the audio signals to the unit.
5-4-1 When using the front microphone
The microphone of the AJ-MC900G mic kit (optional
accessory) can be attached to the viewfinder.
1
Open the mic holder.
2
Attach the microphone, and tighten the locking screw.
Install the microphone by setting the
indication to
the top.
UP
3 Connect the microphone’s connecting cable to the MIC
IN jack on the camera.
4
Set the AUDIO IN switch or switches to “FRONT” in
accordance with the audio channel or channels whose
sound is to be recorded.
Locking
screw
MIC IN jack
AUDIO IN
switches
5-4-2 When using a wireless receiver
When using a UniSlot wireless receiver
1
Remove the slot cover, insert the wireless receiver, and
screw it down.
2 Set the AUDIO IN switches to WIRELESS for the audio
channels whose audio signals are to be recorded.
Chapter 5 Preparation
(continued)