Panasonic AJ-HDX900E - Manual (Page 60)

60
Chapter 4 Adjustments and settings for recording
(continued)
Switch the signals output from the MON OUT connector by
using MONI OUT MODE item on the menu (<OUTPUT SEL>
screen on the SYSTEM SETTING page).
4-8-2 Settings of signals output from MON
OUT connector
Set the video signals output from the MON OUT connector
by using the MONI OUT item on the menu (<OUTPUT SEL>
screen on the SYSTEM SETTING page).
The HD-Y signals can be used for applying GEN LOCK to
other devices. It is impossible to superimpose markers and
characters on the HD-Y signals.
Even when the tape is replayed, images from the camera are
output.
Set to superimpose characters to the HD SDI signals output
from the MON OUT connector in the MONI OUT CHARA
item of the menu (<OUTPUT SEL> screen on the SYSTEM
SETTING page).
Set the marker and user boxes to superimpose on the output
signals from the MON OUT connector by using the
respective items on the <MONITOR OUT SETTING> screen
(SYSTEM SETTING page) of the menu.
Item
Variable
range
Remarks
MONI OUT HD-SDI
HD-Y Set video signals output from the MON OUT
connector.
HD-SDI: For outputting the HD SDI signals
HD-Y:
For outputting the analog HD-Y
signals
Item
Variable
range
Remarks
MONI OUT MODE CAM
VTR Switch the signals output from the MON
OUT connector.
CAM: The camera images are output at all
times.
VTR: In the recording or other EE mode,
camera images are output from the
connector; in playback mode, the
VTR’s playback signals are output.
Item
Variable
range
Remarks
MONI OUT CHARA ON
OFF Superimpose characters on the HD SDI
output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
<Note>
This does not link with the VIDEO OUT
CHARACTER switch.
USER BOX WIDTH 1
:
13
:
100
For setting the horizontal width of the user
box.
USER BOX
HEIGHT 1
:
13
:
100
For setting the vertical height of the user
box.
USER BOX H POS –50
:
+00
:
+50
For setting the horizontal position of the user
box center.
USER BOX V POS –50
:
+00
:
+50
For setting the vertical position of the user
box center.
Item
Variable
range
Remarks
MONI OUT CENTR
MARK OFF
1
2
3
4 For setting the center marker to be
superimposed on the HD SDI output signals
of the MON OUT connector.
OFF: The center marker is not displayed.
1:
+ (large)
2: Center blank (large)
3: + (small)
4: Center blank (small)
MONI OUT
SAFETY MARK OFF
1
2 For setting the type of the safety marker
frame to be superimposed on the HD SDI
output signals of the MON OUT connector.
OFF: The safety marker frame is not
displayed.
1: Box
2: Corner frames
MONI OUT FRM
MARK ON
OFF For superimposing the frame marker on the
HD SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
MONI OUT USER
BOX ON
OFF For superimposing the user box on the HD
SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
SAFETY AREA 80%
:
90%
:
100%
For setting the size of the safety marker.
It is possible to set the size by units of 1%
with a fixed ratio between of width and
height.
FRM SIG 4:3
13:9
14:9
VISTA For setting the frame marker.
The VISTA setting is 16:8.65.
O The user box can be displayed in any position as a box-
type cursor.