Pioneer VSX-LX70 - Manual (Page 25)

Controls and displays 04
25
En
DIGITAL VIDEO SCALER indicator – Lights when
Resolution is set to a setting other than PURE (for
example, when the video input signal is upscaled)
(page 68).
HDMI indicator – Blinks when connecting an HDMI-
equipped component; lights when the component is
connected (page 52).
7 Listening mode buttons
HOME THX – Press to select a Home THX listening
mode (page 30).
STANDARD SURROUND – Press for Standard
decoding and to switch between the various
2 Pro Logic IIx and Neo:6 options (page 29).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 30).
8 MASTER VOLUME dial
9 Front panel controls
To access the front panel controls, push gently on the
lower third portion of the panel with your finger.
10 SPEAKERS
Use to change the speaker system (page 54).
11 AUDIO PARAMETER
Use to access the Audio options (page 68).
12 VIDEO PARAMETER
Use to access the Video options (page 69).
13 TUNER EDIT
Use with / to memorize and name stations for recall
(page 36).
14 BAND
Switches between AM and FM radio bands (page 35).
15 MULTI-ZONE & SOURCE/REC SEL controls
If you’ve made MULTI-ZONE connections (see MULTI-
ZONE listening on page 56) use these controls to control
the sub zone from the main zone (see Using the MULTI-
ZONE controls on page 58).
You will also need to use the REC SEL controls when
recording a source (see Making an audio or a video
recording on page 70).
16 SIGNAL SELECT
Use to select an input signal (page 32).
17 SBch PROCESSING
Selects the surround back channel mode (page 32) or
virtual surround back mode (page 33).
18 STEREO/F.S.SURR
Switches between the stereo playback mode (page 31)
and the Front Stage Surround Advance mode (page 31).
19 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
20 SETUP
Press to access the System Setup menu (see page 37).
21 / / / ( TUNE / ST ) / ENTER
Use the arrow buttons when setting up your surround
sound system (see page 37). Use the
TUNE / buttons
to find radio frequencies and use ST / to find preset
stations (page 36).
22 RETURN
Press to confirm and exit the current menu screen.
23 USB interface ( VSX-LX70 only )
Connect a USB audio device for playback.
See the separate manual for HOME MEDIA GALLERY.
24 MCACC SETUP MIC jack
Use to connect the supplied microphone.
25 VIDEO/GAME 2 INPUT
See Connecting a component to the front panel inputs on
page 18.
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver’s remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
30
30
7 m
VSX_LX60LX70.book 25 ページ ２００７年７月１８日 水曜日 午前１０時１９分