Pioneer VSX-LX70 - Manual (Page 60)

Other connections 08
60
En
Important
• You can’t use the SR+ features when HDMI Control
is set to ON. Make sure to set HDMI Control to OFF
when you use the SR+ features (page 63).
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won’t be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Setup menu on page 64 and SR+ Setup for Pioneer
plasma displays on page 66 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 66 for more on setting up the receiver.
Important
• The SR+ features do not work when any of the iPod
or HOME MEDIA GALLERY ( VSX-LX70 only ) function is
selected.
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you’ve connected the receiver in The Input
Setup menu on page 64.
2 To switch SR+ mode on/off, press RECEIVER , then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF .
• The automatic video input switching and the
automatic volume muting features are enabled
separately; see
SR+ Setup for Pioneer plasma displays
on page 66.
VSX-LX70
MASTER
VOLUME
STANDBY/ON
INPUT SELECTOR
PHASE CONTROL
PHASE CONTROL AUTO SURR/ STREAM DIRECT MCACC POSITION
ADVANCED MCACC DIGITAL VIDEO SCALER HDMI DIGITAL PRECISION PROCESSING
HOME THX STANDARD
SURROUND ADVANCED
SURROUND
DVD player
Pioneer plasma
display
This receiver
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
SAT
AUDIO IN
DVD/LD
AUDIO IN
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
DVD TV BD TV CTRL
DVR1 i Pod TUNER RECEIVER
CD
DVR2 HOME MEDIA GALLERY
CD-R
ZONE2/3
HDMI
SLEEP
CLEAR
+10
SR+
ANALOG
ATT
DISC
DIMMER
CLASS D.ACCESS
ENTER
ST ST
ENTER
A PARAMETER
TOP MENU ì V PARAMETER
MENU T.EDIT
BAND
RETURN RETURN SETUP SETUP
PROGRAM
ì
CH
LEVEL
GENRE
ì
TUNE
TUNE
VSX_LX60LX70.book 60 ページ ２００７年７月１８日 水曜日 午前１０時１９分