Pioneer VSX-LX70 - Manual (Page 47)

The System Setup menu 07
47
En
1 Select ‘MCACC Data Check’ from the Data
Management setup menu.
2 Select the setting you want to check.
• It is useful to do this while a source is playing so you
can compare the different settings.
3 Select the MCACC preset that you want to check.
Use the / buttons if necessary to switch speakers/
settings.
4 Press RETURN to go back to the Data Check menu,
repeating steps 2 and 3 to check other settings.
5 When you’re finished, press RETURN .
You will return to the Data Management setup menu.
Renaming MCACC presets
If you have several different MCACC presets that you’re
using, you may want to rename them for easier
identification.
1 Select ‘Memory Rename’ from the Data
Management setup menu.
2 Select the MCACC preset you want to rename, then
select an appropriate preset name.
Use
/
to select the preset, then
/
to select a
preset name.
3 Repeat for as many MCACC presets as necessary,
then press RETURN when you’re finished.
You will return to the Data Management setup menu.
Copying MCACC preset data
If you want to manually adjust the Acoustic Calibration
EQ (see
Manual MCACC setup above), we recommend
copying your current settings
1
to an unused MCACC
preset. Instead of just a flat EQ curve, this will give you a
reference point from which to start.
1 Select ‘ MCACC Memory Copy ’ from the Data
Management setup menu.
2 Select the setting you want to copy.
• All Data – Copies all the settings of the selected
MCACC preset memory.
• LEVEL & DISTANCE – Copies only the channel level
and speaker distance settings of the selected
MCACC preset memory.
3 Select the MCACC preset you’ll be copying the
settings ‘From’ then specify where you want to copy
them (‘To’).
Make sure you don’t overwrite an MCACC preset you’re
currently using (this can’t be undone).
4 Select ‘Copy’ to confirm and copy the settings.
Completed shows in the OSD to confirm the MCACC
preset has been copied, then you automatically return to
the Data Management setup menu.
Clearing MCACC presets
If you are no longer using one of the MCACC presets
stored in memory, you can choose to clear the calibration
settings of that preset.
1 Select ‘ MCACC Memory Clear ’ from the Data
Management setup menu.
2 Select the MCACC preset you want to clear.
Make sure you don’t clear an MCACC preset you’re
currently using (this can’t be undone).
3 Select ‘Clear’ to confirm and clear the preset.
Completed shows in the OSD to confirm the MCACC
preset has been cleared, then you automatically return to
the Data Management setup menu.
: R e t u r n
5 . D a t a M a n ag e m e n t
DV D / L D - 5 5 . 0 dB
a . M C AC C D a t a C h e ck
b . M e m o r y R e n a m e
c . M C AC C M e m o r y C o py
d . M C AC C M e m o r y C l e a r
e . O u t p u t P C
: R e t u r n
5 a . M C AC C D a t a C h e ck
DV D / L D - 5 5 . 0 dB
1 . S p e a k e r S e t t i n g
2 . C h a n n e l L ev e l
3 . S p e a k e r D i s t a n c e
4 . S t a n d i n g Wav e
5 . A c o u s t i c C a l E Q
6 . F U L L BA N D P H A S E C T R L
E N T E R : N ex t
63 125 250 500 1k 2k 4k 8k 16k TRIM
MCACC M1 63Hz : +0.5
Ch [SBL] 125Hz : -5.5
dB 250Hz : +3.0
500Hz : 0.0
1kHz : +12.0
2kHz : +5.5
4kHz : -3.0
8kHz : 0.0
16kHz : +7.0
:Return TRIM : -2.5
5 a 5 . E Q D a t a C h e ck
DV D / L D - 5 5 . 0 dB
: R e t u r n
5 . D a t a M a n ag e m e n t
DV D / L D - 5 5 . 0 dB
a . M C AC C D a t a C h e ck
b . M e m o r y R e n a m e
c . M C AC C M e m o r y C o py
d . M C AC C M e m o r y C l e a r
e . O u t p u t P C
: F i n i s h
M C AC C Po s i t i o n R e n a m e
M 1 M E M O RY 1
M 2 [ M E M O RY 2 ]
M 3 [ M E M O RY 3 ]
M 4 [ M E M O RY 4 ]
M 5 [ M E M O RY 5 ]
M 6 [ M E M O RY 6 ]
5 b . M e m o r y R e n a m e
DV D / L D - 5 5 . 0 dB
Note
1 The settings made in Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 8 or Automatic MCACC (Expert) on page 37.
: R e t u r n
5 . D a t a M a n ag e m e n t
DV D / L D - 5 5 . 0 dB
a . M C AC C D a t a C h e ck
b . M e m o r y R e n a m e
c . M C AC C M e m o r y C o py
d . M C AC C M e m o r y C l e a r
e . O u t p u t P C
:Cancel
Copy
All Data
From
[ M1. MEMORY 1 ]
To
[ M2. MEMORY 2 ]
Start Copy [Cancel ]
5 c . M C AC C M e m o r y C o py
DV D / L D - 5 5 . 0 dB
: R e t u r n
5 . D a t a M a n ag e m e n t
DV D / L D - 5 5 . 0 dB
a . M C AC C D a t a C h e ck
b . M e m o r y R e n a m e
c . M C AC C M e m o r y C o py
d . M C AC C M e m o r y C l e a r
e . O u t p u t P C
: C a n c e l
C l e a r
M 1 . M E M O RY 1
S t a r t cl e a r [ C a n c e l ]
5 d . M C AC C M e m o r y C l e a r
DV D / L D - 5 5 . 0 dB
VSX_LX60LX70.book 47 ページ ２００７年７月１８日 水曜日 午前１０時１９分