Pioneer VSX-LX70 - Manual (Page 32)

Listening to your system 05
32
En
Selecting MCACC presets
• Default setting: MEMORY 1
If you have calibrated your system for different listening
positions 1 , you can switch between settings to suit the
kind of source you’re listening to and where you’re sitting
(for example, watching movies from a sofa, or playing a
video game close to the TV).
• While listening to a source, press MCACC ( MCACC
POSITION ).
Press repeatedly to select one of the six MCACC presets
2
or to switch calibration off. See Data Management on
page 46 to check and manage your current settings.
Choosing the input signal
You need to hook up a component to both analog and
digital inputs on the receiver to select between input
signals. 3
• Press SIGNAL SEL (SIGNAL SELECT ) to select the
input signal corresponding to the source component.
Each press cycles through the options as follows:
• AUTO – This is the default setting. The receiver
selects the first available signal in the following
order:
HDMI ; DIGITAL ; ANALOG .
• ANALOG – Selects an analog signal.
• DIGITAL – Selects an optical or coaxial digital signal.
• HDMI – Selects an HDMI signal.
4
• PCM – Only PCM signals are output. 5 The receiver
selects the first available signal in the following
order:
HDMI ; DIGITAL .
When set to DIGITAL or AUTO , 2 DIGITAL lights with
Dolby Digital or Dolby Digital Plus decoding, 2 HD
lights with Dolby TrueHD decoding, DTS lights with DTS
or DTS-HD decoding, and WMA9 Pro lights to indicate
that a WMA9 Pro signal is being decoded.
Using surround back channel processing
• Default setting: SBch ON
You can have the receiver automatically use 6.1 or 7.1
decoding for 6.1 encoded sources (for example, Dolby
Digital EX or DTS-ES), or you can choose to always use
6.1 or 7.1 decoding (for example, with 5.1 encoded
material). With 5.1 encoded sources, a surround back
channel will be generated, but the material may sound
better in the 5.1 format for which it was originally
encoded (in which case, you can simply switch surround
back channel processing off).
The table below indicates when you will hear the
surround back channel when playing various kinds of
sources (
ì =Sound plays through surround back
speaker(s)).
• Press SBch ( SBch PROCESSING ) repeatedly to cycle
the surround back channel options.
Each press cycles through the options as follows:
• SBch ON – 6.1 or 7.1 decoding is always used (for
example, a surround back channel will be generated
for 5.1 encoded material)
• SBch AUTO – Automatically switches to 6.1 or 7.1
decoding for 6.1 encoded sources (for example,
Dolby Digital EX or DTS-ES)
• SBch OFF – Maximum 5.1 playback
Note
1 Different presets might also have separate calibration settings for the same listening position, depending on how you’re using your system. These
presets can be set in
Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 8 or Automatic MCACC (Expert) on page 37,
either of which you should have already completed.
2 • You can’t use these settings when
MULTI CH IN is switched on, and they has no effect when headphones are connected.
• You can also press / to select the MCACC preset.
3 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96 kHz / 24 bit) and WMA9 Pro digital signal formats. With
other digital signal formats, set to
ANALOG (the MULTI CH IN , TUNER , PHONO and iPod input functions are all fixed to ANALOG ).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital
connections (page 17) and set the signal input to DIGITAL .
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
4 When the HDMI option in Setting the Audio options on page 68 is set to THROUGH , the sound will be heard through your TV, not from this receiver.
SHIFT
STATUS STATUS
MCACC S.DIRECT
MULTI OPE
SIGNAL SEL
T.DISP
SBch STEREO/
F.S.SURR
ADV. SURR STANDARD
PHASE
THX
RECEIVER
PHOTO
SHIFT
STATUS STATUS
MCACC S.DIRECT
MULTI OPE
SIGNAL SEL
T.DISP
SBch STEREO/ F.S.SURR
ADV. SURR STANDARD
PHASE
THX
CH CH DISP
RECEIVER
PHOTO
5 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
SHIFT
STATUS STATUS
MCACC S.DIRECT
MULTI OPE
SIGNAL SEL
T.DISP
SBch STEREO/ F.S.SURR
ADV. SURR STANDARD
PHASE
THX
RECEIVER
PHOTO
VSX_LX60LX70.book 32 ページ ２００７年７月１８日 水曜日 午前１０時１９分