Panasonic DMC-FZ2A - Manual (Page 12)

Preparation
12
Inserting the Battery
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
• Close the flash. (P37)
1 Slide the lever to the direction of the
arrow to open the Memory Card/
battery door.
2 Insert the charged battery all the way
in, until it is locked.
3 Close the Memory Card/battery door.
[Removing the battery]
1 Open the Memory Card/battery door.
2 Slide the lock 1 to the direction of the
arrow to remove the battery.
3 Close the Memory Card/battery door.
• If you will not be using the camera for a long
time, remove the battery.
• When the fully charged battery is inserted to
the camera more than one hour, the clock
setting is memorized by the camera for
about 24 hours even after the battery is
removed. (The time may be shorter if the
battery is not charged sufficiently)
When the clock setting is cancelled, please
set the date/time again. (P28)
• When the card is being read, do not open
the Memory Card/battery door.
• The battery supplied with this camera is
exclusively designed for this camera. Do not
use with any other equipment.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type recommended by
the manufacturer. Dispose of used
batteries according to the manufacturer’s
instructions.
3
2
3
2
OPEN
OPEN
A-BODY.fm 12 ページ ２００３年８月２５日 月曜日 午後２時２分