Panasonic DMC-FZ2A - Manual (Page 84)

Technical use
84
Setting up the Power Save Mode
In this mode, if the camera is not operated for
a certain amount of time, it is automatically
turned off.
1 Press the [MENU] button.
2 Press 1 to open the setup menu.
3 Press 3/4 to select [POWER SAVE].
4 Press 2/1 to choose the setting time.
• [2MIN.]
• [5MIN.]
• [10MIN.]
• [OFF]: the power is not turned off
automatically.
5 Press the [MENU] button.
• The menu will disappear.
• If you want to cancel the power save mode, turn the power switch to [ON] again
after turning it to [OFF], or press the shutter button.
• When using the AC adaptor/connecting to a PC/recording the motion image/
playing back the motion image/during Slide Show, the power save mode is not
available.
• In simple mode [ ], the power save is fixed to [2MIN.].
1,5
2,3,4
3,4
REC SETUP 1/2
MONITOR
AUTO REVIEW OFF
POWER SAVE
BEEP
5MIN. 10MIN. OFF 2MIN.
SELECT SET EXIT MENU
FZ2-A.book 84 ページ ２００３年８月６日 水曜日 午前１０時０分