Panasonic DMC-FZ2A - Manual (Page 16)

Preparation
16
ª Access to the card
When the card is being accessed, the
card access indication
1 lights.
When the card access indication 1 is
lit, do not:
• turn the power [OFF].
• remove the battery or the card.
• pull the DC cable out if you use the AC
adaptor.
The card and the card contents may be
destroyed and the camera may not
operate normally.
It is possible that images stored on the
card can be damaged due to accidental
erasure, static electricity, electrical noise
or a defective card. We strongly suggest
copying the images to your PC’s hard
drive using the USB connection
explained on P88.
ª SD Memory Card (supplied)
and MultiMediaCard (optional)
The SD Memory Card and
MultiMediaCard are small, lightweight,
removable external cards. The reading/
writing speed of SD Memory Card is
fast. The SD Memory Card is equipped
with a write protection switch that can
inhibit writing and formatting. (When the
switch is moved towards the [LOCK]
side, it is not possible to write or delete
data on the card and format it. When the
switch is unlocked, these functions
become available)
SD Memory Card
MultiMediaCard
• The reading/writing
speed of
MultiMediaCards is
slower than SD cards.
When MultiMediaCards
are used, the performance of certain
features may be slightly slower than
advertised.
• After recording motion images using
the MultiMediaCard, the card access
indication may appear for a while, but
this is not a malfunction.
• Keep the Memory Card out of reach of
children to prevent swallowing.
P 1600
FZ2-A.book 16 ページ ２００３年８月６日 水曜日 午前１０時０分