Panasonic DMC-FZ2A - Manual (Page 77)

Technical use
77
Adding Audio to Recorded Pictures
(Audio Dubbing)
It is possible to add a 10-second narration to
a recorded picture.
[Preparation]
• Set the mode dial to playback [
]. (P25)
1 Press the [MENU] button.
2 Press 3/4 to select [AUDIO DUB.]
and then press 1.
3 Press 2/1 to select the picture.
4 Press the 4/[REVIEW/SET] button to
start audio recording. ( 1 Microphone)
• When audio has already been
recorded, after the audio dubbing the
original audio is overwritten.
• When audio has already been
recorded, this message is displayed
“OVERWRITE AUDIO DATA?”. Then
press
2 to select [YES], and press the
4/[REVIEW/SET] button to start audio
recording.
5 Press the 4/[REVIEW/SET] button to
stop audio recording.
• Even if you do not press the
4/[REVIEW/SET] button, after about
10 seconds the audio recording stops
automatically.
6 Press the [MENU] button 2 times.
• The menu will disappear.
• Adding audio will use additional memory.
Using this feature will result in fewer images
being able to be saved.
• The audio dubbing cannot be used with
motion images.
• The audio dubbing cannot be used with
protected images.
1,6
2,3,4,5
DUB.
3,4
2
PROTECT
DPOF PRINT
SLIDE SHOW
AUDIO DUB.
RESIZE
PLAY 1/2 SETUP
SELECT SET EXIT MENU
1600
START
SELECT
EXIT
AUDIO
MENU
FZ2-A.book 77 ページ ２００３年８月６日 水曜日 午前１０時０分