Panasonic DMC-FZ2A - Manual (Page 58)

Recording images (advanced)
58
Setting the White Balance
Auto White Balance is designed to
automatically adjust the camera to produce
natural flesh tones. In most situations it works
fine. In some situations where several
different types of lighting are present,
enhanced performance can be achieved by
setting the white balance manually.
[Preparation]
• Set the mode dial except for [
]/[ ]/
[ ]. (P25)
1 Press the [MENU] button.
2 Press 3/4 to select [W.BALANCE].
3 Press 2/1 to select the mode.
• [AUTO]: if the auto white balance is set
• [
] (Daylight):
for recording outdoors on a bright day
• [ ] (Cloudy):
for recording under cloudy and shady
sky
• [ ] (Halogen):
for recording under halogen lighting
• [ ] (White set):
for manual setting (Read the following
page where the manual setting is
explained in detail)
4 Press the [MENU] button.
• The menu will disappear.
• In simple mode [ ] or motion image mode [ ], the white balance is fixed to
[AUTO].
• The setting of the white balance is applied to the other recording modes.
• When taking a picture with the flash, the white balance will be automatically
adjusted (only when in [AUTO], halogen mode [ ]), but the white balance may
not be properly adjusted when the flash light is insufficient.
1,4 2,3
1600 PICT.SIZE
QUALITY
REC 1/4 SETUP
AE MODE P AE
2,3
W.BALANCE
AUTO
SELECT SET EXIT MENU
FZ2-A.book 58 ページ ２００３年８月６日 水曜日 午前１０時０分