Panasonic DMC-FZ2A - Manual (Page 17)

Preparation
17
Turning Power on/off
1 Set the power switch to [ON].
• The power indicator 1 lights.
2 Set the power switch to [OFF].
ª Power indicator
Lighting:
• When turning the power switch to [ON]
Blinking:
• When the Memory Card/battery door is
opened
• When the card is not inserted
• When no space is left in the card
• When the card is protected during
recording
• When setting the mode dial from the
playback mode to recording mode with
the lens cap attached
• When the remaining battery power is
low (blink slowly)
• When the power switch is turned on, do not hold the lens cover. If the lens cover
does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.
• When turning on the power in the recording mode, do not put any obstacle in front
of the lens.
• Please be sure to remove the lens cap before you switch on the camera in
recording mode. If not, the message “REMOVE LENS CAP AND PRESS
BUTTON” appears on the LCD monitor/Viewfinder. Please remove the lens
cap and press 4/[REVIEW/SET] button 2.
• Do not make a pressure on the lens when the lens barrel comes out. Confirm that
the lens is put in when you wipe the lens.
OFF ≥ ≥ ON
1,2
OFF ≥ ≥ ON
FZ2-A.book 17 ページ ２００３年８月６日 水曜日 午前１０時０分