Pioneer VSX-LX50 - Manual (Page 20)

Connecting your equipment 03
20
En
Using an external antenna to improve FM
reception
Use an F connector to connect an external FM antenna
using a coaxial 75
Ω cable.
Using the antenna adapter
Use the antenna adaptor to terminate the coaxial cable
used with an external FM antenna.
1 Cut and strip the coaxial cable to the specification
shown in the diagram.
2 Open the adaptor body by pulling apart the tabs on
either side.
3 Insert the cable as shown, then use a pair of pliers
to wrap the end of the wire around the binding post.
Snip off the excess wire.
4 Use pliers to secure the cable by pinching the
clamps together, as shown.
5 Push the body cover back on.
Using an external antenna to improve AM
reception
To improve AM reception, connect a 5 m to 6 m length of
vinyl-coated wire to the
AM LOOP terminals without
disconnecting the supplied AM loop antenna.
For the best possible reception, suspend horizontally
outdoors.
AM LOOP
ANTENNA
Antenna
adapter
Wire mesh Pull back Wire
10 mm to 20 mm 5 mm 9 mm
Tabs
AM LOOP
FM UNBAL 75 Ω
ANTENNA
Outdoor antenna
5 m to 6 m
Indoor antenna
(vinyl-coated wire)
VSX-LX50.book 20 ページ ２００７年４月１２日 木曜日 午後５時３分