Pioneer VSX-LX50 - Manual (Page 57)

Other Settings 10
57
En
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1 Press RECEIVER on the remote control, then press
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/ / / buttons and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
2 Select ‘Other Setup’ then press ENTER .
3 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
• SR+ Setup – Specify how you want to control your
Pioneer plasma display (see SR+ Setup for Pioneer
plasma displays below).
• OSD Adjustment – Adjust the position of the on-
screen display on your TV (see OSD Adjustment
below).
4 Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you’ve connected.
See also Using this receiver with a Pioneer plasma display
on page 54 and Using the SR+ mode with a Pioneer
plasma display on page 55.
1 Select ‘SR+ Setup’ from the Other Setup menu.
2 Select the ‘PDP Volume Control’ setting you want.
• OFF – The receiver does not control the volume of the
plasma display.
• ON – When the receiver is switched to one of the
inputs that use the plasma display ( DVD/LD , for
example), the volume on the plasma display is muted
so only sound from the receiver is heard.
3 Assign any input source connected to the plasma
display to the corresponding input number.
This matches the receiver’s input source with a
numbered video input on the plasma display. For
example, assign
DVD/LD to input-2 if you have
connected the your DVD video output to video input 2 on
the plasma display.
• The Monitor Out Connect should be set to the input
that you’ve used to connect this receiver to your
plasma display.
4 When you're finished, press RETURN .
You will return to the Other Setup menu.
OSD Adjustment
Use this feature to adjust your TV display if it seems
difficult to see all the instructions on the screen.
1 Select ‘OSD Adjustment’ from the Other Setup
menu.
2 Use / / / to move the display field around
until you get one that you feel best suits your TV.
3 When you're finished, press ENTER .
You will return to the Other Setup menu.
CD OPT 3
CD-R/TAPE/MD ì
TUNER
iPod
Input source
Input Terminals
Digital Component
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
: Exit
7.Other Setup
:Return
a.SR+ Setup
b.OSD Adjustment
7.Other Setup
:Return
a.SR+ Setup
b.OSD Adjustment
7a.SR+ Setup
:Finish
PDP Volume Control
OFF
Monitor Out Connect
[ OFF ]
7a.SR+ Setup
:Finish
PDP Volume Control
[ OFF ]
Monitor Out Connect
OFF
7.Other Setup
:Return
a..SR+ Setup
b.OSD Adjustment
:Cancel
X=0 , Y=0
[ Finish ]
VSX-LX50.book 57 ページ ２００７年４月１２日 木曜日 午後５時３分