Using the virtual surround back mode, Listening to your system 05 – Pioneer VSX-LX50 User Manual

Page 31

Advertising
background image

Listening to your system

05

31

En

Using the Virtual Surround Back mode

When you’re not using surround back speakers,
selecting this mode allows you to hear a virtual surround
back channel through your surround speakers. You can
choose to listen to sources with no surround back
channel information, or if the material sounds better in
the format (for example, 5.1) for which it was originally
encoded, you can have the receiver only apply this effect

to 6.1 encoded sources like Dolby Digital EX or DTS-ES.

1

The table indicates when you will hear the virtual
surround back channel (

ì

=Virtual surround back

channel is active).

Press

SB ch

(

SB ch PROCESSING

) repeatedly to cycle

the virtual surround back channel options.

Each press cycles through the options as follows:

VirtualSB ON

– Virtual Surround Back is always used

(for example, on 5.1 encoded material)

VirtualSB AUTO

– Virtual Surround Back is

automatically applied to 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)

VirtualSB OFF

– Virtual Surround Back mode is

switched off

Note

1 • You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when any of the

THX

, stereo, Front Stage

Surround Advance or Stream Direct mode is selected.

• You can only use the Virtual Surround Back mode if the surround speakers are on and the

Surr Back

setting is set to

NO

in the

Speaker Setting

on

page 46.

• Depending on the input signal and the listening mode, the Virtual Surround Back mode may not be effective.

Type of source

SBch

Processing /

Virtual SB

mode

Standard / THX

Advanced

surround

Multichannel

sources

Stereo sources

2

Pro Logic IIx

2

Pro Logic

Neo:6

Dolby Digital EX/DTS-ES 5.1 ch sources with
6.1 ch flagged

ON

м

м

AUTO

м

м

Dolby Digital/DTS and DVD-Audio 5.1 ch
sources

ON

м

м

AUTO

ì

c

ì

Dolby Digital/DTS/PCM and DVD-Audio stereo
sources

ON

м

м

a

м

м

AUTO

ì

b

м

м

Analog 2-channel (stereo) sources

ON

м

м

a

м

м

AUTO

ì

b

м

м

DTS-HD Master Audio/DTS-HD/Dolby Digital
Plus/Dolby TrueHD/WMA9 Pro encoded and
PCM 6.1 ch/7.1 ch sources

ON

м

м

d

AUTO

м

м

d

Dolby Digital Plus/Dolby TrueHD/WMA9 Pro
(44.1 kHz/48 kHz) encoded and PCM 5.1 ch
sources

ON

м

м

d

AUTO

ì

c

ì

d

DTS-HD Master Audio/DTS-HD/
DTS-EXPRESS/WMA9 Pro (88.2 kHz/96 kHz)
encoded 5.1 ch sources

ON

ì

c

ì

d

AUTO

ì

c

ì

d

Dolby Digital Plus/Dolby TrueHD/WMA9 Pro
(44.1 kHz/48 kHz) encoded stereo sources

ON

м

м

a

ì

d

AUTO

ì

b

ì

d

DTS-HD Master Audio/DTS-HD/
DTS-EXPRESS/WMA9 Pro (88.2 kHz/96 kHz)
encoded stereo sources

ON

AUTO

a. Only applicable when using the Virtual Surround Back mode.
b. Not applicable when using the Virtual Surround Back mode.
c. Sound is output from the surround back speakers only when THX Select2 CINEMA, THX MUSICMODE or THX GAMES MODE is selected.
d. Advanced surround mode may not be available depending on the input signal.

VSX-LX50.book 31 ページ 2007年4月12日 木曜日 午後5時3分

Advertising