Panasonic AG-MX70 - Manual (Page 13)

13
Parts and their functions
Audio mixer area
Mod i f y
MAX
MIN MIN
MAX
MASTER
SOURCE
1 / 5
SOURCE
2 / 6
SOURCE
3 / 7
SOURCE
AUX 1
MIC /
AUX 2 4 / 8
DR
1 2 3 4 5 6 7
SOURCE 1/5 fader
This fader is used to adjust the audio level of input 1
which was set on the initial setting page; when it is
operated together with the shift key, it is used to adjust
the audio level of input 5.
The operation of the fader lever takes effect from where
the internal level and lever position match or where the
higher/lower relationship between them has been
reversed when the input has been switched.
1
2 SOURCE 2/6 fader
This fader is used to adjust the audio level of input 2
which was set on the initial setting page; when it is
operated together with the shift key, it is used to adjust
the audio level of input 6.
The operation of the fader lever takes effect from where
the internal level and lever position match or where the
higher/lower relationship between them has been
reversed when the input has been switched.
3 SOURCE 3/7 fader
This fader is used to adjust the audio level of input 3
which was set on the initial setting page; when it is
operated together with the shift key, it is used to adjust
the audio level of input 7.
The operation of the fader lever takes effect from where
the internal level and lever position match or where the
higher/lower relationship between them has been
reversed when the input has been switched.
SOURCE 4/8 fader
This fader is used to adjust the audio level of input 4
which was set on the initial setting page; when it is
operated together with the shift key, it is used to adjust
the audio level of input 8.
The operation of the fader lever takes effect from where
the internal level and lever position match or where the
higher/lower relationship between them has been
reversed when the input has been switched.
4
5 AUX 1 fader
This fader is used to set the audio level of input AUX 1.
6 MIC/AUX 2 fader
This fader is used to adjust the audio level of the input
AUX2 selected on the initial setting page or of MIC
(sound selected by Setup).
7 MASTER fader
This fader is used to adjust the output level.
It executes the effects which have been set by the Audio
Effects ON button.
<Note>
The adjusted sounds of 1 to 8 are selected at the cross
points and combined.
When [FOLLOW] is ON, the transition is coupled with Video.
When [FOLLOW] is OFF, the transition is not coupled with
Video. The sounds of both A and B are combined.
The output level can be adjusted using the MASTER fader.
The effects that have been set are executed using the Audio
Effects ON button.