Panasonic AG-MX70 - Manual (Page 74)

74
Overview of MX-Navi
MX-Navi is software used when transmitting images from a PC to the AG-MX70 and displaying them and when reading still
images from the AG-MX70 into a PC.
The following are possible when a PC has been connected to the AG-MX70.
≥ DSK display of the PC screen as telop or animation.
≥ Display of the PC screen with internal matte.
≥ Images provided as input to the AG-MX70 can be read into the PC as still images and be converted to image files.
About this software
Description of the software
The software contained in the CD is described below.
∫ USB driver
This driver software is for communications when the AG-
MX70 is connected to a PC via the USB port.
∫ MX-Navi
This software is for use when transmitting images from a PC
to the AG-MX70 and playing them back and when reading
still images from the AG-MX70 into a PC. Installing this
software makes the following possible.
Transmitting of images from a PC to the AG-MX70
≥ PC images can be transmitted to the AG-MX70 as Title
data or IntVideo data.
≥ Playback and pause operations can be performed with
the transmitted data.
Reading of still images from the AG-MX70 into a PC
≥ Images displayed on the AG-MX70 can be read into a
PC as still images.
Management of the AG-MX70 memory
≥ It is possible to check the status and change the
settings of the AG-MX70’s image memory.
Refer to “Before use” on pages 77 to 79 when installing this
software.
System requirements
The PC to be used should meet the following requirements.
≥ Computer DOS/V with USB port
≥ OS Windows 98
Windows ME
Windows 2000 Professional
Windows XP HomeEdition
Windows XP Professional
≥ CPU Pentium II 300 MHz or better
≥ RAM 64 MB or more
≥ Display True Color (24 bits, 32 bits)
800a600 dots or more
≥ Hard disk 5 MB or more free space
≥ Other CD-ROM drive