Panasonic AG-MX70 - Manual (Page 91)

91
Other operations
3) Select “File” > “Capture Title” from the menu of the
memory status screen to read in Title data.
Select “File” > “Save IntVideo” from the menu of the
memory status screen to read in IntVideo data.
4) Enter the image format and the file name and click
“OK.”
When the data to be read in is composed of multiple
images, a number will be automatically appended at
the end of the file name.
<Notes>
≥ For saving in of Title data, the image format is fixed to
TARGA (32 bit/pixel, with α channel).
≥ For saving in of IntVideo data, the image format can be
selected as TARGA, JPEG, or BMP (all 24 bits/pixel, no α
channel).
≥ Capture the IntVideo data after the IntVideo playback has
been stopped at the AG-MX70 main unit.
≥ Images cannot be transmitted while the “Loading...”
display appears on the LCD screen immediately after the
AG-MX70’s power has been turned on or immediately
after changes have been made to the image memory
settings.
≥ While transmission is in progress, the LCD display of the
AG-MX70 shuts down.
Recalling events
AG-MX70 events can be recalled from the PC.
1) Select “AG-MX70 setup” from the “Tools” menu of the
main window.
2) Input the number of the event to be recalled into the
“Event Recall” column on the mixer setting window,
and click the “Recall” button. The event is now
recalled.
Select the data by left-
clicking in the status
display column.
Saving data
Title data or IntVideo data can be read to the PC from the
image memory of the AG-MX70 and can be stored as still
images. Use the following procedure.
1) Select “Tools” > “Memory status” from the menu of
the main window to open the memory status screen.
2) Left-click on the data to be read into the PC in the
status display column of the memory status screen.
The data changes to selected status (the color will
become darker).
Transmission and playback of IntVideo data
The operations for transmission and playback of PC images
as IntVideo data is described below.
1) Select “Tools”
> “Memory status” from the menu of
the main window and open the memory status
screen.
2) Select “File” > “Load Intvideo” from the menu of the
memory status screen.
The “Open file” dialog will be opened.
3) For transmission of a STILL image to the AG-MX70,
select the image and click “OK.”
To play back MOVIE images, select the image to be
played back first from a series of images and click
“OK” to display the playback format setting screen.
When the playback format and the number of frames
to be transmitted have been set and “OK” is clicked,
the images will be transmitted to the AG-MX70.
4) Left-click the data to be played back in the status
display column on the memory management screen.
The data is set to the selected status (status in which
the color darkens).
5) Select “Operation” > “Preview” from the memory
status screen menu.
The data is now played back.
<Notes>
≥ Crawl and Roll playback formats cannot be used for
IntVideo data.
≥ Images cannot be transmitted immediately after the AG-
MX70’s power has been turned on or immediately after
changes have been made to the image memory settings.
≥ While transmission is in progress, the LCD display of the
AG-MX70 shuts down.
≥ Before playback, INT/EXT must be selected by the AG-
MX70.
Clearing IntVideo data
The operation for deletion of transmitted IntVideo data from
the image memory of the AG-MX70 is described below.
1) Select “Tools”
> “Memory status” from the menu of
the main window to open the memory status screen.
2) Left-click the data to be deleted in the status display
column of the memory status screen.
The data changes to selected status (the color
becomes darker).
3) Select “Operation”
> “Clear specified area ” from the
menu of the memory status screen.
The data is cleared.