Panasonic AG-MX70 - Manual (Page 87)

87
Off: This is used for setting the operation to be
performed when the data is deleted from the
screen (DSK OFF).
≥ AutoTrigger: This sets the start operation.
No check: DSK OFF will be performed when the playback
button on the main window is pressed or when
the DSK button on the main unit is pressed.
Check: DSK OFF will be performed according to the
time set for Duration.
≥ Effect: Same as for DSK ON.
≥ Slide : Same as for DSK ON.
Duration: This is used for setting the data playback time.
The playback time also includes the time for
DSK ON and DSK OFF. This is effective only
when AutoTrigger of DSK OUT is checked.
Position: This is used for setting the data display position
as the offset (pixels) from the left top of the
screen.
X and Y can be set for STILL and MOVIE, Y can
be set for CRAWL, and X can be set for Roll.
≥ X: A value from 0 to 719 can be set for NTSC
as well as PAL.
≥ Y: A value of 0 to 480 can be set for NTSC,
and a value of 0 to 576 can be set for PAL
(only even numbers).
Protect: When this is checked, the data will not be
cleared from the memory by normal clearing
operation.
Mark: Any number from 1 to 9 can be set. When the
number to be set is selected via “Cursor”
>
“Jump to Mark.” it is possible to jump straight to
the desired data.
Name: This is used for setting the name of the data. Up
to 128 single-byte characters can be entered.
Comment: This is used for setting a comment for the data.
Up to 128 single-byte characters can be entered.
<Notes>
≥ The initial value for the playback setting can be changed
at the “Initial set of Property data” screen. (Refer to page
92.)
≥ When the pattern entered for DSK ON and DSK OFF is a
pattern that can not be used with DSK, automatic
correction will be made to a similar pattern.
≥ When there are 3000 or more patterns, the same pattern
must be used for DSK ON and DSK OFF.
For 0 to 2999 patterns, the combination of DSK ON and
DSK OFF can be selected freely.
≥ Set Time as 00:00 when no special effects are to be used
with DSK ON and DSK OFF.
≥ The position Y value cannot be set when DIVIDE is 1.
Title data operations
Description of the setting items (depending on the data
playback format, some items may not be displayed or
setting may not be possible)
Icon: This is used for setting the frame number of the
image to be used for display in the ICON row of
the main window.
Mode: This is used for selecting ONCE or REPEAT
when MOVIE display is being used.
During ROLL and CRAWL, it is used for
selecting the scroll direction and entering the
speed (number of pixels to be moved per field).
On: This is used for setting the operation when the
data is displayed on the screen (DSK ON).
≥ AutoTrigger: This sets the start operation.
No check: DSK ON will be performed when the playback
button on the main window is pressed or when
the DSK button on the main unit is pressed.
Check: DSK ON will be executed when the specified
time has expired after the data playback
operation.
≥ Effect: This sets the special effects.
Pattern: The specified pattern will be used at DSK ON.
Diss: Dissolve will be used.
Time: Set the time for execution of special effects
from 00:00 to 00:30.
≥ Slide: This is used for the slide display settings.
Dir: Click the arrow to select the slide direction.
Speed: Enter the slide speed (number of pixels to be
moved per field).