Panasonic AG-MX70 - Manual (Page 76)

76
Processing of image data
∫ Management of the image memory
≥ Memory capacity
Images transmitted from the PC are stored in the
AG-MX70’s image memory. The memory capacity
differs, depending on the AG-MX70’s video format
setting.
NTSC: 30 pages
(1 page = amount of memory required for 1
image on Monitor 1 screen)
PAL: 26 pages
The image memory is divided into separate areas for
Title data and IntVideo data and capacity can be
allocated freely as required.
≥ DIVIDE
The number of memory pages used differs,
depending on the number of vertical pixels, however
this only applies when images are transmitted as
Title data. The memory pages being used can be
reduced by adjusting the size of the image for DSK
playback, so that a larger number of images can be
played back.
NTSC
Number of vertical pixels Number of memory pages used
1 to 60 1/8 page
1/4 page
1/2 page
61 to 120
121 to 240
1 page 241 to 480
PAL 1 to 72 1/8 page
1/4 page
1/2 page
73 to 144
145 to 288
1 page 289 to 576
<Notes>
≥ When the vertical position is set, images with a small
number of vertical pixels can be played back on the lower
part of the screen. This is effective for DSK playback of
telop or logos at the lower part of the screen.
≥ IntVideo data always use one memory page, regardless of
the image size.