Panasonic AG-MX70 - Manual (Page 19)

19
System Diagram
ADV
REF *1 RS-422A
RS-422A
RS-422A
RS-422A
G/L *2
(Genlock enabled as
genlock source)
SDI
(Audio/Video)
SDI
(Audio/Video)
SDI
(Audio/Video)
SDI
(Audio/Video)
SDI IN2
SDI IN1
SDI IN3
SDI IN4
AUX1/AUX2
AG-MX70
PC (with MX-Navi already
installed)
SDI OUT
Analog audio signals
USB
Video camera
Video camera
VTR
VTR
VTR
CD player, etc.
Signal
generator
Editing
controller
Example 3 Editing application
*1: Connection of the ADF REF signal is not absolutely essential but when this signal has been connected,
“StillOff” can be selected by the bus setting (see page 56) on the “Setup” initial setting screen and input can
be switched directly using the cross point button.
*2: ADV REF can also be used as an alternative to the G/L loop-through signal as the sync signal supplied to
the AG-A850 editing controller.
Through connection
Through connection
Through connection
Through connection
Termination