Panasonic AG-MX70 - Manual (Page 28)

28
[Video Effects] setting screen
On
Off
≥ When [Multi] (multi-screen) has been selected
[Size] can be set to any value from 0 to 15 using the
rotary 3 control. The default setting is 8.
[Pitch] can be set to any value from 0 to 255 using the
rotary 4 control. The default setting is 16.
[Reverse] can be set to [On] or [Off] using the rotary 5
control. The default setting is [Off].
This level and other settings are used as the transition
number 1983 settings.
≥ When [Spark] has been selected
[Width] can be set to any value from 0 to 255 using the
rotary 3 control. The default setting is 32.
[Size] can be set to any value from 1 to 3 using the rotary
4 control. The default setting is 2.
[Time] can be set to any value from 0 to 255 using the
rotary 5 control. The default setting is 255.
This level and other settings are used as the transition
number 1982 settings.
3D
Multi
Size
8
Pitch
2
Reverse
Off
0 - 15 0 - 255
≥ When [Ripple] has been selected
The extent of the [Level] effect can be set to any value
from 0 to 255 using the rotary 3 control. The default
setting is 32.
[Time] can be set to any value from 0 to 255 using the
rotary 4 control. The default setting is 64.
[Width] can be set to any value from 0 to 5 using the
rotary 5 control. The default setting is 1.
The ripple position can be set using joystick XY.
This level and other settings are used as the transition
number 1981 settings.
3D
Ripple
Level
32
Time
64
Width
1
0 - 255 0 - 255 0 - 5
3D
Spark
Width
32
Size
2
Time
255
0 - 255 0 - 255 1 - 3
[3D] setting
Select [OFF], [Ripple], [Multi] or [Spark] for 3D using the
rotary 2 control. This setting is only effective when the 3D
optional board (AG-VE70) has been installed. It cannot be
made to take effect at the same time as 3D transition or key
pattern. The default setting is [Off].
3D
Ripple
Level
32
Time
64
Width
1
Off
Ripple
Multi
Spark 0 - 255 0 - 255 0 - 5
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5