Panasonic 8045 - Manual (Page 169)

169
Setting
Y
our Machine
No. Parameter Setting Comments
022 Substitute RCV Invalid Selecting whether the machine receives to memory when the recording paper
Valid runs out, toner runs out or the recording paper is jammed.
024 Print Reduction Fixed Selecting print reduction mode.
Auto Fixed : Reduce received document according to setting of Parameter No.
025 (Reduction Ratio).
Auto : Automatically determines and reduces the incoming document to
print onto the paper loaded in the machine.
025 Reduction Ratio 70% Selecting the fixed print reduction ratio from 70% to 100%. This parameter
—— functions only when the fixed print reduction is selected on Fax Parameter
100% No. 024 (Print Reduction).
026 Polling Password (——) Setting a 4-digit password for secured polling. (See pages 34, 36)
027 Polled File Save Invalid Selecting whether the machine retains the polled document in memory even
Valid after the document is polled once.
028 Stamp At Memory XMT Invalid Selecting whether the machine stamps the original documents when storing
Valid the documents into memory.
(Depends on the Stamp setting on the Control Panel)
031 Incomplete File Save Invalid Selecting whether the machine retains the document in memory if the
Valid document is not successfully transmitted.
033 XMT Reduction Invalid Selecting whether the machine performs reduction when the transmitting
Valid original is wider than the recording paper used at the receiving machine.
037 Receive To Memory (——) Enter a 4-digit password for printing the received document(s) in memory by
using “MODE SETTING”, “SELECT MODE”, “RECEIVE TO MEMORY”.
When “RECEIVE TO MEMORY” is set to ON, this parameter is not selectable
on the LCD display. (See page 104)
039 PIN Code Access None Selecting the access method (Prefix or Suffix) to dial a number with PIN Code.
Suffix (See page 106)
Prefix
042 Conf. File Save Invalid Selecting whether the machine saves the confidential polled file even after
Valid the file is polled once.
043 Password-Transmit (——) Setting a 4-digit XMT-Password and selecting whether the machine performs
and checks the XMT-Password of the receiving station when transmitting.
(See page 98)
044 Password-Receive (——) Setting a 4-digit RCV-Password and selecting whether the machine performs
and checks the RCV-Password of the transmitting station when receiving.
(See page 98)
046 Select Receive Invalid Selecting whether the machine performs selective reception. (See page 110)
Valid
052 Diagnostic Password (——) Setting the password for Remote Diagnostic Mode. Please ask your Panasonic
Authorized Dealer for details.
053 Sub-Address Password (——) Setting a 20-digit password for secured sub-address communication.
Continue on the next page...