Panasonic 8045 - Manual (Page 192)

192
Problem Solving
Verification Stamp
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be replaced, or refilled
with ink.
1
Open the ADF Tray.
2
Open the Inner Cover while holding the
green-labeled tab.
5
1. Remove by pulling the Stamp Assembly upward.
2. Remove the Stamp. Replace the stamp with a new one, or
refill the stamp with a few drops of the specified ink into the
back of the stamp.
Verification Stamp Order No.:
DZHT000027
NOTE 1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp.