Problem solving, Information code – Panasonic 8045 User Manual
Page 188
188
Problem Solving
634
Redial was not successful due to no response from
the called station or wrong number dialled.
Note: If busy tone was not detected, the machine will
only redial once.
Check the telephone number and send again.
---
Info. Code
Meaning
Possible Action
Page
Information Code
638
Power failure occurred during the communication.
Check the power cord and plug.
---
711
Incorrect LDAP settings.
Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base.
712
Incorrect email address.
Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator.
---
714
Cannot Log on to the LAN.
Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
---
715
TCP/IP connection timed out.
Check the Internet Fax parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.
---
716
Cannot logon to the designated SMTP Server.
Check the SMTP Server IP Address setting.
Contact the Network Administrator.
---
717
Incomplete SMTP Protocol transmission. SMTP
Server's hard disk may be full.
SMTP Server is defective.
Contact the Network Administrator.
---
718
Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size
loaded in the tray(s).
Check the document size and resolution.
Ask originator to re-send in a supported size
and resolution.
---
719
Received data via LAN is in a format that is not
supported.
Ask the originator to re-send with a supported
file attachment format:
* In a TIFF-F format.
* Image data conforming to recording paper
size.
---
720
Cannot connect to the POP Server. (Incorrect POP
Server IP Address) POP Server is down.
Check the POP Server IP Address.
Contact the Network Administrator.
---
721
Cannot connect to the POP Server. (User Name or
Password error)
Check the POP User Name and Password or
the APOP settings.
Contact the Network Administrator.
---