Pioneer DV-989AVi-G - Manual (Page 34)

Getting Started 04
34
En
Playing discs
The basic playback controls for playing DVD,
CD, SACD, Video CD/Super VCD and MP3
discs are covered here. Further functions are
detailed in the next chapter.
• Throughout this manual, the term ‘DVD’
means DVD-Video, DVD-Audio and DVD-
R/RW. If a function is specific to a partic-
ular kind of DVD disc, it is specified.
1 If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD/Super
VCD, also turn on your TV and make sure that
it is set to the correct video input.
2 Press OPEN/CLOSE to open the disc
tray.
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
Never load more than one disc at a time.
4 Press (play) to start playback.
If you’re playing a DVD or Video CD/Super
VCD, a menu may appear. See
DVD disc
menus on page 35 and Video CD/Super VCD
PBC menus on page 36 for how to navigate
these.
If you’re playing an MP3 disc, it may take a
few seconds before playback starts,
depending on the complexity of the file struc-
ture on the disc.
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.
E/ E/
SETUP
DISPLAY AUDIO SUBTITLE ANGLE
TOP MENU
OPEN / CLOSE
MENU
– MULTI SPEED +
ENTER
VIDEO ADJUST DIMMER JOG MODE
V.ADJ FL JOG
PLAY MODE SURROUND
8 7 3
4 ¢ 1 ¡
0 9 8 7
ENTER 6 5 4
C 3 2 1
CLEAR
TV CONTROL
Button What it does
Starts playback.
DVD and Video CD/Super VCD: if
the display shows
RESUME , play-
back starts from the resume
point.
Pauses a disc that’s playing, or
restarts a paused disc.
DV-989AVi _YP.book Page 34 Thursday, August 11, 2005 3:28 PM