Dvd/cd/video cd/super vcd player, Additional information 09 – Pioneer DV-989AVi-G User Manual

Page 88

Advertising
background image

Additional information

09

88

En

DVD/CD/Video CD/Super VCD player

Problem

Remedy

The remote control doesn't
seem to work.

• The

CONTROL IN

jack on the rear panel is connected: Point the

remote control at the connected component to control this player.
• The remote control is too far from the player, or the angle with the
remote sensor is too wide: Use the remote within its operating range
(see

Using the remote control

on page 8).

• The batteries are exhausted: Put in new ones (see

Putting the

batteries in the remote control

on page 8).

No picture/No color.

• Check that the

PURE AUDIO

indicator is not lit. If it is, press the

PURE AUDIO

button (

See also

Front panel

on page 23).

• Incorrect video connections: Check that connections are correct
and that plugs are inserted fully. Also check the video cable for
damage.
• TV/monitor or AV amplifier settings are incorrect: Check the
instruction manual of the connected equipment.
• The video output is set to progressive but your TV/monitor is not
compatible with progressive scan: Press the

PROGRESSIVE

button on

the front panel to set to interlace (the indicator above the button
should not be lit) (see

About progressive scan video

on page 24).

Screen is stretched or
aspect does not change.

• The

TV Screen

setting in the Initial Settings menu is incorrect. See

TV Screen

on page 60 for how to set it correctly for your TV/monitor.

• If your TV/monitor is connected using an S-video cable, try changing
the

S-Video Out

setting (see

S-Video Out

on page 61).

Picture disturbance during
playback or dark.

• This player is compatible with Macro-Vision System copy guard.
Some discs include a copy prevention signal, and when this type of
disc is played back, stripes etc., may appear on some sections of the
picture depending on the TV. This is not a malfunction.
• Due to the player’s copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
• The TV system may be set inappropriately. See

Setting the TV System

on page 28.

DV-989AVi _YP.book Page 88 Thursday, August 11, 2005 3:28 PM

Advertising