Pioneer DV-989AVi-G - Manual (Page 54)

Audio Settings menu 06
54
En
• Use the Joystick (up/down) to select a
speaker.
• Use the Joystick (left/right) to adjust the
channel level for that speaker.
Channel levels can be set from –6 dB to +6
dB. in 0.5 dB increments.
5 Press ENTER to make the settings and
exit the audio settings screen.
• You can’t adjust the channel level for any
speakers that are set to Off in the
Speaker Installation menu screen (see
Speaker Installation on page 71).
• The Fix setting is equivalent to setting all
the channel levels to +6 dB . Therefore, the
Variable setting will usually sound
quieter than the Fix setting.
Speaker Distance
• Default setting: all speakers 3 m
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Move the cursor down until you reach
the Speaker Distance setting screen.
• Use the joystick (up/down) to select a
speaker.
• Use the joystick (left/right) to adjust the
distance from your listening position to
that speaker.
Front left/right ( L/R ) speaker distances can be
set from 30 cm to 9 m in 10 cm increments.
The center speaker ( C ) and subwoofer ( SW )
can be set from –2 m to +2 m relative to the
front left/right speakers.
Surround left/right ( LS/RS ) speakers can be
set from –6 m to +2 m relative to the front left/
right speakers.
When you adjust the front left ( L ) or front right
( R ) speaker, all the other speaker distances
are adjusted relative to that speaker.
3 Press ENTER to make the settings and
exit the audio settings screen.
• The speaker distance settings have no
effect on SACD playback. The channel
level settings, however, do apply.
Audio Settings 2/ 2
Speaker Distance L
Speaker Distance C
Speaker Distance R
Speaker Distance RS
Speaker Distance LS
Speaker Distance SW
3m
3m
3m
3m
3m
3m
DV-989AVi _YP.book Page 54 Thursday, August 11, 2005 3:28 PM