Pioneer DV-989AVi-G - Manual (Page 91)

Additional information 09
91
En
HDMI troubleshooting
Problem Remedy
No HDMI audio output. • This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) Version 1.1. Depending on the
component you have connected, unreliable signal transfers may
result.
• If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
– It is not possible to output SACD sources from the HDMI
connection.
• If the front panel
HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible. (
An HDMI connection can only
be made with components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
– Check that the PURE AUDIO indicator is not lit. If it is, press the
PURE AUDIO button ( See also Front panel on page 23).
DV-989AVi _YP.book Page 91 Thursday, August 11, 2005 3:28 PM