Pioneer DV-989AVi-G - Manual (Page 71)

Initial Settings menu 08
71
En
DTS Downmix
• Default setting: Stereo
If you’ve selected DTS > PCM in DTS Out on
page 59, or 2 Channel in Audio Output Mode
below, you can choose the way the DTS signal
is downmixed PCM audio.
Stereo downmixes
the signal to 2-channel stereo, whereas Lt/Rt
downmixes to a 2-channel signal compatible
with Dolby surround matrix decoders. (This
allows you to hear surround sound if your AV
receiver or amplifier has Dolby Pro Logic
capability.)
If you’ve selected DTS > PCM in DTS Out on
page 59 and 5.1 Channel in Audio Output
Mode below, the DTS Downmix setting will
automatically be set to Stereo .
Speakers
Audio Output Mode
• Set in Setup Navigator (Default: 2
Channel )
If you connected this player to an AV receiver
using the 5.1 channel analog outputs, set this
to
5.1 Channel . This will enable you to enjoy
multichannel sound.
If you connected only the stereo analog
outputs, set to
2 Channel . On this setting
multichannel audio is downmixed to 2 chan-
nels for stereo analog output.
• When set to 5.1 Channel , you’ll only get
sound from all speakers when playing
multichannel discs.
• When set to 5.1 Channel the AUDIO
OUT (2ch) jacks output the front L/R
channels of multichannel discs.
• When set to 5.1 Channel there is no
optical/coaxial digital output when
playing DVD-Audio discs.
• Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always
output multi-channel audio regardless of
the setting made here.
Speaker Installation
• Set in Setup Navigator (default: L/R:
Large | C: Large | LS/RS: Large| SW: On )
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect any digital audio
output.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup CD Playback
DTS Downmix Stereo
Lt/Rt
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
2 Channel
5.1 Channel
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
3 2 Channel
3 Fix
Initial Settings
DV-989AVi _YP.book Page 71 Thursday, August 11, 2005 3:28 PM