Pioneer DV-989AVi-G - Manual (Page 70)

Initial Settings menu 08
70
En
• RGB – Use this setting if colours appear
overly rich on the Full Range RGB setting.
• Component (12-bit) – Outputs 12-bit
component video format. If your
connected device is compatible with this
setting, 12-bit output provides very fine
gradations of colour (if it is not compat-
ible with this setting, the setting automat-
ically reverts to
Component ).
• Component – Outputs 8-bit component
video format. This is the standard setting
for HDMI-compatible devices.
Video Memory
These settings allow you to change the
appearance of the HDMI video presentation.
You can also access these options from the
Video Adjust menu (see
Video Adjust on
page 55 for more on this).
• Direct – The picture appears simply
according to how the source was
encoded.
• Natural – Edges are softer making this
setting good for movies.
• Enhanced – Edges are sharper making
this setting ideal for animation and mate-
rial with computer generated effects.
• Memory1–3 – Use for saving your own
presets (see Creating your own presets on
page 55 for more on this
Audio
If the monitor or device you have connected
using HDMI is not compatible with
compressed multi-channel formats, you
should set this to
Linear PCM , otherwise set
to Auto .
• Linear PCM – All audio signals are output
as linear PCM.
• Auto – Dolby Digital, DTS and MPEG
sources are processed according to how
they were encoded, and linear PCM
sources are heard with no processing.
• Even with Auto selected, if the monitor or
device you have connected using HDMI is
not compatible with multi-channel
formats, the audio signal will be output as
linear PCM.
• It is not possible to output SACD from the
HDMI connection.
• If necessary, sources with high sample
rates (such as DVD-Audio 88.2/96/176.4/
192 kHz sources) will be downsampled to
match the sampling rate of your
connected HDMI component.
CD Playback
• Default setting: PCM Playback
When set to PCM Playback , playback is opti-
mized for standard audio CDs. You can also
play DTS CDs, however you may notice some
noise when a DTS CD starts playing. This is
not a malfunction.
When set to DTS CD Playback , playback is
optimized for DTS CDs. In this mode you
cannot play standard audio CDs through the
analog outputs. Change the setting back to
PCM Playback to play standard CDs.
The i.LINK audio output is not affected by this
setting.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup CD Playback
DTS Downmix PCM Playback
DTS CD Playback
Initial Settings
DV-989AVi _YP.book Page 70 Thursday, August 11, 2005 3:28 PM