Polycom DOC2585A User Manual
Page 112
Chapter 3- Audio Only Basic Configuration and Operation
3-36
Type
The network communication protocol used by the
endpoint to connect to the conference: H.323, SIP or
ISDN/PSTN.
The fields in the dialog box change according to the
selected network type.
IP Address
(H.323 and SIP
Only)
Enter the IP address of the participant’s endpoint.
•
For H.323 participant define either the endpoint
IP address or alias.
•
For SIP participant define either the endpoint IP
address or the SIP address.
Note: This field is hidden when the ISDN/PSTN
protocol is selected.
Phone Number
(ISDN/PSTN
Only)
Enter the phone number of the ISDN/PSTN
participant.
Note: This field is only displayed when the ISDN/
PSTN protocol is selected.
Alias Name/Type
(H.323 Only)
If you are using the endpoint’s alias and not the IP
address, first select the type of alias and then enter
the endpoint’s alias:
•
H.323 ID (alphanumeric ID)
•
E.164 (digits 0-9, * and #)
•
Email ID (email address format,
e.g. [email protected])
•
Participant Number (digits 0-9, * and #
Note:
•
Although all types are supported, the type of alias
is dependent on the gatekeeper’s capabilities. The
most commonly supported alias types are H.323
ID and E.164.
•
This field is used to enter the Entry Queue ID,
target Conference ID and Conference Password
when defining a cascaded link.
•
This field is removed from the dialog box when the
ISDN/PSTN protocol is selected.
Table 3-6
New Participant – General Properties (Continued)
Field
Description