First entry power-up and configuration, Procedure 1: first-time power-up, First entry power-up and configuration -19 – Polycom DOC2585A User Manual
Page 49: Procedure 1: first-time power-up -19
Advertising
Polycom RMX 1500/2000/4000 Getting Started Guide
2-19
First Entry Power-up and Configuration
There are four procedures necessary for setup of the new RMX. It is
important that they are performed in the following sequence:
1
First-time Power-up
2
Product Registration.
3
Connection to MCU.
4
Modifying the Default IP and ISDN/PSTN Service Settings (Fast
Configuration Wizard).
Procedure 1: First-time Power-up
To power-up for the first time using the USB key:
1
Insert the USB key containing the modified IP addresses in USB port
on the RMX 1500 front panel and RMX 2000/4000 back panel.
Preparations
Hardware
Installation
and
Setup
First Entry
Power-up and
Configuration
Advertising